Good Morning,
I have a customer that has an offgrid cabin that is wired for 110v and
has an older 48v SW inverter that puts out 110v. We are upgrading his
solar equipment and I'm trying to figure out what is the best option for
his inverter. The idea was to install an Outback FXR sytle inverter, but
it's really hard to find equipment and I'm hearing that their equipment is
being less used and produced. Next idea was an all in one inverter, but
most of them put out split phase 240v and I'm wondering if it harms the
inverter to only use 1 leg and run an somewhat large unbalanced load. Any
opinions?
--
Jim with Gowdy Electric
Cambria, Ca 93428
business 805 927 2630
cell 805 975 5279
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
