Hey Jim, Curious why the output needs to be 120Vac only? A 120/240Vac service panel with multiple single pole loads distributed across both legs isn’t necessarily a bad thing. Are you restricted by existing 120V wire runs? 120V generator? It might make for a better outcome to lean into 120/240Vac system architecture.
Kindly, Chris On Wed, Oct 28, 2026 at 7:07 PM Amanda Potter <[email protected]> wrote: > Victron is awesome, but how do you get support? > > They leave it to the distributors, but, come on… where is “real-time” help? > > Doesn’t exist, & they don’t care, (Victron). > > Amanda Potter > Adirondack Battery & Solar, LLC > (315) 212-2114 > > On Oct 28, 2026, at 6:05 PM, Jason Szumlanski < > [email protected]> wrote: > > > I think Midnite or Victron are the go-to options for 120V right now. > > > Jason Szumlanski > Principal Solar Designer | Florida Solar Design Group > NABCEP Certified Solar Professional (PVIP) > Florida State Certified Solar Contractor CVC56956 > Florida Certified Electrical Contractor EC13013208 > > > > > On Wed, Oct 28, 2026 at 9:03 AM Jim Gowdy <[email protected]> > wrote: > >> Good Morning, >> I have a customer that has an offgrid cabin that is wired for 110v >> and has an older 48v SW inverter that puts out 110v. We are upgrading his >> solar equipment and I'm trying to figure out what is the best option for >> his inverter. The idea was to install an Outback FXR sytle inverter, but >> it's really hard to find equipment and I'm hearing that their equipment is >> being less used and produced. Next idea was an all in one inverter, but >> most of them put out split phase 240v and I'm wondering if it harms the >> inverter to only use 1 leg and run an somewhat large unbalanced load. Any >> opinions? >> -- >> Jim with Gowdy Electric >> Cambria, Ca 93428 >> business 805 927 2630 <(805)%20927-2630> >> cell 805 975 5279 <(805)%20975-5279> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> >> https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > > https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > > https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
