Jim: What type of batteries will you be using?
William Miller On Wed, Oct 28, 2026 at 6:04 AM Jim Gowdy <[email protected]> wrote: > Good Morning, > I have a customer that has an offgrid cabin that is wired for 110v > and has an older 48v SW inverter that puts out 110v. We are upgrading his > solar equipment and I'm trying to figure out what is the best option for > his inverter. The idea was to install an Outback FXR sytle inverter, but > it's really hard to find equipment and I'm hearing that their equipment is > being less used and produced. Next idea was an all in one inverter, but > most of them put out split phase 240v and I'm wondering if it harms the > inverter to only use 1 leg and run an somewhat large unbalanced load. Any > opinions? > -- > Jim with Gowdy Electric > Cambria, Ca 93428 > business 805 927 2630 > cell 805 975 5279 > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > > https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
