Shane,
Got this off the Marine Depot Site: (www.marinedepot.com) This is for the
PFO reflectors, which if I understand you correctly are oriented just
opposite of what you have now. They also have the spider reflectors.
Parallel reflector is predrilled for the following fluorescent sockets:
15" - Holds one 28W PC on each side of reflector. Dimensions: 15" W 12.25"D
6.5"H
24" - Holds either one 2� VHO or 55W PC on each side of reflector.
Dimensions:24" W 12.25"D 6.5"H
2-24" -Holds one 4� VHO or 1 96W PC or two 55W PC on each side of reflector
36" - Holds one 3� VHO or 1 96W PC or one 55W PC on each side of reflector.
The 36" holds either one or two metal halide lamps. Dimensions: 36" W
12.25"D 6.5"H
To see them go to their web site under Lighting, then PFO Components...
under MH Lighting. None of them handle four VHO bulbs. Hopefully you have
enough room to mount two bulbs outside the reflector. After looking at
mine, I'm pretty sure you could piggy-back the VHO sockets one inside
(pre-drilled) the reflector, and one mounted (you'd drill) outside
reflector. I forgot how expensive they were, but they are nice.
Hope this helps.
-Mike
>From: Shane Clays <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
>Subject: RE: MH Light Positioning
>Date: Thu, 8 Mar 2001 08:39:46 -0700
>
>Hey Mike. Thanks for the response. I have the bulbs themselves covering the
>length of the tank, but the light they cast actually goes front to back,
>out
>of the sides of the bulb. I have the tips of the bulbs facing the left hand
>side and the right hand side (2 bulbs) and the way MHs cast their light, it
>mostly goes front to back. Not sure if you understood that from my first
>message (I tend to over inform and cause confusion!). The only reflector I
>am using right now is the hood. It is painted a glossy white. I don't know
>if I could use a spider reflector in the hood, because it may interfere
>with
>the VHOS. They are pretty close to the MH bulbs. Do you know what the
>measurements on those reflectors are?
>
>Thanks,
>Shane C.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
