It is CTCSS encode/decode...didn't you see my other post....that's what the MN6520 chip is!
Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Politics is the art of appearing candid and completely open, while concealing as much as possible. -States: The Bene Gesserit View -----Original Message----- From: Adi Linden [mailto:[EMAIL PROTECTED] Sent: Saturday, November 22, 2003 10:38 AM To: [email protected] Subject: Re: [Repeater-Builder] What is this board? > Voice Inversion Scamblers/Descrablers? what were they hooked into? The tx and rx audio is routed through these boards, there's also power, ptt and a couple more wires that I didn't follow. These boards could be anything including scrambler/descrambler, ctcss encode/decode, etc that processes audio. If they're ctcss I would actually have use for one or two. But I would also need to find a schematic or datasheet for the chip (MN6520). Adi -- Adi Linden | va3adi | [EMAIL PROTECTED] | http://adis.ca +-----------------------------------------------------------------+ IRLP Node 2590 in Sioux Lookout, Ontario Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
