I've done this with the link up all the time for some commercial systems we
put in.....BUT...we spend the money on the links.  We used TAIT modules, and
actually bang for buck they were a good deal.  Got the 5 watt transmitters
and ran them at 1-1/2 to 2 watts.  One system we installed was in 1993 and
it's still going strong, with 3 remote sites transmitting status tone back
all the time.


Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075 KX1 S# 57
Politics is the art of appearing candid and completely open, while
concealing as much as possible.   -States: The Bene Gesserit View
 


-----Original Message-----
From: franknmiss [mailto:[EMAIL PROTECTED] 
Sent: Thursday, December 04, 2003 4:36 PM
To: [email protected]
Subject: [Repeater-Builder] Re: UHF Links with Voters

Rich, 
Is the link on all the time or just on when a signal is received?
I was hoping someone had experience with  link equipment on UHF that 
could be run continuously.
Thanks,
Frank
--- In [email protected], [EMAIL PROTECTED] wrote:
> Frank,
> 
> I use a Motorola Spectratac. I only use the tone encoder on the link
> receivers at the comparitor site. The remote receiver to link tx is
> cos/Pl activated.
> 
> Rich
> 
> On Wed, 03 Dec 2003 23:10:41 -0000 "franknmiss" <[EMAIL PROTECTED]>
> writes:
> > Does anyone in the group have experience with tone supervised UHF 
> > links back to a voter? I was wondering what you used for the link 
> > transmitter and do you operate it continuous duty? How much power 
> > and 
> > how far to the link receiver?
> > Thanks,
> > Frank, KO5S 
> > 
> > 
> > 
> > 
> > 
> >  
> > 
> > Your use of Yahoo! Groups is subject to 
> > http://docs.yahoo.com/info/terms/ 
> > 
> > 
> > 
> 
> 
> ________________________________________________________________
> The best thing to hit the internet in years - Juno SpeedBand!
> Surf the web up to FIVE TIMES FASTER!
> Only $14.95/ month - visit www.juno.com to sign up today!





 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 






 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


Reply via email to