Thanks Jeff
--- In [email protected], "Jeff DePolo WN3A" <[EMAIL PROTECTED]> wrote: > > I set up a couple of low-power (12 watt) UHF Moxy's for broadcast telemetry > use maybe 8 years ago and they've been running continuous key-down with no > failures since. They have a small muffin fan blowing on the heatsink and > are turned down to a couple of watts. > > --- Jeff > --------- > Jeff DePolo WN3A > Broadcast and Communications Consultant > > > -----Original Message----- > > From: Jim [mailto:[EMAIL PROTECTED] > > Sent: Friday, December 05, 2003 9:41 AM > > To: [email protected] > > Subject: Re: [Repeater-Builder] Re: UHF Links with Voters > > > > > > franknmiss wrote: > > > > > Thanks Steve, > > > Was hoping to find a UHF link system I could run continuously to > > > eliminate the delay and noise (and not burn up!). Good info > > though, I > > > didn't think the voter would work well with the initial noise on > > > remote key up. I wanted to use the Doug Hall voter too. > > > I also like your initials ... SSB thats great to have in the ham > > > business! > > > Thanks, > > > Frank, KO5S > > > > > > > We've been using Maxar-80's turned down to abt 5-7W. > > Also for low power HT-90/440's work well at abt 2-2.5W on a > > 4W unit, or > > 1W or less for the 2W units. > > > > -- > > Jim > > > > -------- > > "The higher you are, the harder it is to pump." > > -Cleveland Mayor Jane Cambell, after the big black-out of 2003 > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
