I set up a couple of low-power (12 watt) UHF Moxy's for broadcast telemetry
use maybe 8 years ago and they've been running continuous key-down with no
failures since. They have a small muffin fan blowing on the heatsink and
are turned down to a couple of watts.
--- Jeff
---------
Jeff DePolo WN3A
Broadcast and Communications Consultant
> -----Original Message-----
> From: Jim [mailto:[EMAIL PROTECTED]
> Sent: Friday, December 05, 2003 9:41 AM
> To: [email protected]
> Subject: Re: [Repeater-Builder] Re: UHF Links with Voters
>
>
> franknmiss wrote:
>
> > Thanks Steve,
> > Was hoping to find a UHF link system I could run continuously to
> > eliminate the delay and noise (and not burn up!). Good info
> though, I
> > didn't think the voter would work well with the initial noise on
> > remote key up. I wanted to use the Doug Hall voter too.
> > I also like your initials ... SSB thats great to have in the ham
> > business!
> > Thanks,
> > Frank, KO5S
> >
>
> We've been using Maxar-80's turned down to abt 5-7W.
> Also for low power HT-90/440's work well at abt 2-2.5W on a
> 4W unit, or
> 1W or less for the 2W units.
>
> --
> Jim
>
> --------
> "The higher you are, the harder it is to pump."
> -Cleveland Mayor Jane Cambell, after the big black-out of 2003
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
