Lee, No, the voter is for a commercial system, was looking for a way to keep out of the microwave business! Good tip on the delay at the receiver site with the tone generator. Many thanks, Frank
--- In [email protected], "Lee Williams" <[EMAIL PROTECTED]> wrote: > If its for amateur use,full time transmit links are illegal !!! If you > are using tone control,put another tone generator at the receiver site > and switch it inline when COS is inactive. Have the link transmitter > follow the rx input with a short delay. This "fakes out" the voter > since it still sees idle tone and the link isnt burning 24/7/365. > 73,Lee,N3APP > > ----- Original Message ----- > From: "franknmiss" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, December 04, 2003 5:44 PM > Subject: [Repeater-Builder] Re: UHF Links with Voters > > > > Thanks Steve, > > Was hoping to find a UHF link system I could run continuously to > > eliminate the delay and noise (and not burn up!). Good info though, > I > > didn't think the voter would work well with the initial noise on > > remote key up. I wanted to use the Doug Hall voter too. > > I also like your initials ... SSB thats great to have in the ham > > business! > > Thanks, > > Frank, KO5S > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
