I simply brought it up since mine worked fine on a 100W+ repeater while I took a look at the regular set. Maybe I could get some deeper notches out of the one I have. I'll have to look into it. Maybe the ones I have are not 642s. I know they are 6-can WACOMs. Regardless, it's something I'll have to look into.
Joe M. [EMAIL PROTECTED] wrote: > > We always did had to change out the shorter rods. And at hamfests, VHF > WACOM duplexers being sold are often noted as having the "2-Meter" notch > rods, etc. if they are all ready to go to 2-Meters. I moved this narrow > split 151 MHz one to 144.79/145.39, and prior to that, to 147.74/147.14, > and all needed the new notch rods. TX-RX is familiar with the correct ones > to use, it's just that they're closed until Monday and we need the info > before then, if possible. > LJ > > Original Message: > ----------------- > From: mch [EMAIL PROTECTED] > Date: Fri, 02 Jan 2004 01:23:26 -0500 > To: [email protected] > Subject: Re: [Repeater-Builder] Need Help WACOM VHF Duplexer Info > > [EMAIL PROTECTED] wrote: > > > > To get it to move to 2-Meters with a 600 KHz split, we had to order three > > new longer notch tuning capacitor brass tubes for one side > > How far down did you go? I think that's the same model I have that went > to 146.37/.97 MHz fine. And I think it started life around 155 MHz, but > that I don't recall with much certainty. I do know it was higher than > 151 MHz. I didn't have to change a thing (except the tuning). > > Joe M. > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
