-I like the way the synthesized speech sounds...- When you can have .wav files, hmmm.
John > > "Our RC-210 will control these radios directly" > >I have been considering that for a while. I REALLY don't want to change >controllers because I like my 7k and the way the synthesized speech >sounds. If push comes to shove, I will do that. I also may use an RC-110 >as an interface controller. > >73, Stephen > > > > > >-----Original Message----- >From: Ken Arck [mailto:[EMAIL PROTECTED] >Sent: Wednesday, February 04, 2004 8:18 PM >To: [email protected] >Subject: Re: [Repeater-Builder] RBI-1 Serial interface and FC-1 > >At 04:10 PM 2/4/2004 -0500, you wrote: >There has got to be more than just the FC-1 protocol that drives the >RBI-1 >such as remote high/low power, dc power on/off, etc. > > ><----I hope you don't mind me answering here, as everyone can benefit >from >information, yes? When driven by the ACC FC-1 "format" serial stream, >you >do not get the fully functionality of the RBI-1 (I believe this is >mentioned in their manual.) You'd need to read that in detail to see >exactly what does and doesn't work when an RBI-1 is used with the FC-1 >stream. > >AH6LE uses the FC-1 for his serial converter to drive the Kenwood G707. > ><----Not exactly<g>. My serial stream converter was designed to allow an >ACC controller (or similar controller that provides the ACC FC-1 >protocol) >to control *some* of the functions in those Kenwood mobiles that allow >control via DTMF injected into the mic port. While the G707 is one of >those >(as is the 732, V7A and some others), I didn't design the converter for >any >particular radio. With it, you can program frequency, PL freq, xmt >offset >and encode/decode select. And interjecting a shameless plug, our RC-210 >will control these radios directly, without the need for an RBI-1 or any >other converter. I'll let someone else provide the info on the >capabilities >of other controllers. > >That is what I am trying to do with my SCOM-7k. It uses the Doug Hall >RBI-1 >serial stream. Is this public? I need to make it fully frequency agile, >PL >agile, etc. > ><---All I can offer here is if you're not sure if the RBI-1 will control >a >G707, why not simply contact Doug Hall directly and ask? Then again as >others have mentioned, maybe there's a way to use your 7K as it is. >There >are lots of knowledgeable folks on this list. > >Ken > >------------------------------------------------------------------------ >------ >President and CTO - Arcom Communications >Makers of state-of-the-art repeater controllers >and accessories. >http://www.ah6le.net/arcom/index.html >Our new Repeater Audio Delay (RAD) board is now shipping! >Compatible with many controllers! >AH6LE/R - IRLP Node 3000 >http://www.irlp.net > > > > > >Yahoo! Groups Links > >To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > >To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > >Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
