> [EMAIL PROTECTED] wrote:
>
> The board being discussed on this list with the high-order filter and
> the limiter, assuming it's designed right, would be an excellent
> addition to the repeater builder's arsenal. Replace the 'blob' and get
> around the soft limiting and the other problems. We talked about doing
> such a board here, but doing a universal version for many different
> repeaters would take serious time. It'll be interesting to hear the
> results.
Joe had me drooling last year when he mentioned that he was working on
them. 8-]~~~
Now, I'm going to be about 5 miles (if that) away from them next
weekend. If I had the time, I would even offer to come over and help
build them.
By 'different repeaters', you mean with different cutoffs, right? Or do
you mean specifically designed for the circuitry it will be driving?
The only other thing I'm really looking for (other than the
aforementioned board) is a notch filter that will notch one specific
CTCSS tone (+/- a few Hz, or a few 'cycles' for Kevin's reading ease)
;-> out of an audio signal. I think NorComm has such a custom board.
Joe M.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
