Hello Matt
Both pot are 25K, audio taper.
Radio J1 pin 14 _____________
/
\
Radio J1 pin 3 ____________>/ Volume (25K)
\
/
3.3K \
Radio J1 pin 2 _____/\/\/\/\_____/
3.3K
Radio J1 pin 2 _____/\/\/\/\_____
/
\
Radio J1 pin 28 ____________>/ Squelch (25K)
\
/
Radio J1 pin 14 _____________\
For mode select tying pin 13 and 14 on J1 will select Mode 1.
Hope this help, 73 de Michel VA2MAA
[EMAIL PROTECTED]
----- Original Message -----
From: "Matt Krick" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 12, 2004 3:31 PM
Subject: [Repeater-Builder] Syntor X Control Cable
> Does any one have information on the value of pots and or capacitors used
on a Syntor X control head for the volume and squelch signals? Or can
somebody draw a sketch of what does what? I had a manual but some one
disapeared with it.
>
>
> Thanks
>
> --Matt
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
