Re: [Repeater-Builder] Syntor X Control Cable

[Michel-A Allard]

Thanks Steve, I was about to send something equivalent, i am not a pro in /"$%?&*() ASCII art!!!   73 from Michel, VA2MAA ;-) ----- Original Message ----- From: Steve Grantham To: Repeater-Builder@yahoogroups.com Sent: Wednesday, April 14, 2004 12:08 PM Subject: Re: [Repeater-Builder] Syntor X Control Cable Maybe this will help!  See the attached JPG file.  Looks to me like the slashes and back-slashes are parts of a resistor symbol, and the greater-than signs are probably wipers on potentiometers.  The attachment is a clip from a screen shot.  Armed with this information, you should be able to work it out or ask the author another question.   Steve, AA5SG :)   ----- Original Message ----- From: "Michel-A Allard" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Monday, April 12, 2004 6:29 PM Subject: Re: [Repeater-Builder] Syntor X Control Cable > Hello Matt > > Both pot are 25K, audio taper. > > Radio J1 pin 14  _____________ >                                                           / >                                                           \ > Radio J1 pin 3   ____________>/   Volume (25K) >                                                           \ >                                                           / >                                         3.3K          \ > Radio J1 pin 2  _____/\/\/\/\_____/ > >                                         3.3K > Radio J1 pin 2  _____/\/\/\/\_____ >                                                           / >                                                           \ > Radio J1 pin 28 ____________>/   Squelch (25K) >                                                           \ >                                                           / > Radio J1 pin 14  _____________\ > > For mode select tying pin 13 and 14 on J1 will select Mode 1. > > Hope this help, 73 de Michel VA2MAA > > [EMAIL PROTECTED] > > > ----- Original Message ----- > From: "Matt Krick" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Monday, April 12, 2004 3:31 PM > Subject: [Repeater-Builder] Syntor X Control Cable > > > > Does any one have information on the value of pots and or capacitors used > on a Syntor X control head for the volume and squelch signals?  Or can > somebody draw a sketch of what does what?  I had a manual but some one > disapeared with it. > > > > > > Thanks > > > > --Matt > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.