|
Maybe this will help! See the attached JPG file. Looks to me like the slashes and
back-slashes are parts of a resistor symbol, and the greater-than signs are
probably wipers on potentiometers. The attachment is a clip from a screen
shot. Armed with this information, you should be able to work it out or
ask the author another question.
Steve, AA5SG
:)
----- Original Message -----
From: "Michel-A Allard" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 12, 2004 6:29 PM
Subject: Re: [Repeater-Builder] Syntor X Control Cable > > Both pot are 25K, audio taper. > > Radio J1 pin 14 _____________ > / > \ > Radio J1 pin 3 ____________>/ Volume (25K) > \ > / > 3.3K \ > Radio J1 pin 2 _____/\/\/\/\_____/ > > 3.3K > Radio J1 pin 2 _____/\/\/\/\_____ > / > \ > Radio J1 pin 28 ____________>/ Squelch (25K) > \ > / > Radio J1 pin 14 _____________\ > > For mode select tying pin 13 and 14 on J1 will select Mode 1. > > Hope this help, 73 de Michel VA2MAA > > [EMAIL PROTECTED] > > > ----- Original Message ----- > From: "Matt Krick" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, April 12, 2004 3:31 PM > Subject: [Repeater-Builder] Syntor X Control Cable > > > > Does any one have information on the value of pots and or capacitors used > on a Syntor X control head for the volume and squelch signals? Or can > somebody draw a sketch of what does what? I had a manual but some one > disapeared with it. > > > > > > Thanks > > > > --Matt > > Yahoo! Groups Links
|
<<attachment: Syntor X.jpg>>
