Re: [Repeater-Builder] Syntor X Control Cable

14 Apr 2004 05:48:47 -0000

Danke, but all I got is this ASCII text which is all scrambled, any way you could sketch something with paint?

Michel-A Allard wrote:
Hello Matt

Both pot are 25K, audio taper.

Radio J1 pin 14  _____________
                                                          /
                                                          \
Radio J1 pin 3   ____________>/   Volume (25K)
                                                          \
                                                          /
                                        3.3K          \
Radio J1 pin 2  _____/\/\/\/\_____/

                                        3.3K
Radio J1 pin 2  _____/\/\/\/\_____
                                                          /
                                                          \
Radio J1 pin 28 ____________>/   Squelch (25K)
                                                          \
                                                          /
Radio J1 pin 14  _____________\

For mode select tying pin 13 and 14 on J1 will select Mode 1.

Hope this help, 73 de Michel VA2MAA

[EMAIL PROTECTED]


----- Original Message -----
From: "Matt Krick" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 12, 2004 3:31 PM
Subject: [Repeater-Builder] Syntor X Control Cable


  
Does any one have information on the value of pots and or capacitors used
    
on a Syntor X control head for the volume and squelch signals?  Or can
somebody draw a sketch of what does what?  I had a manual but some one
disapeared with it.
  
Thanks

--Matt





Yahoo! Groups Links





    






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
     [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/








Yahoo! Groups Links

Reply via email to