Admin wrote:
> i need a pinout of the rear connector as i have 2 of these going for
> repeter usage , and also Randy had mentioned he has a COS circuit
> schematic for these.
>
> ive tried the batlabs web site , very informative for maxar 50's and moxy
> radios , but nothing on the maxar 80 ..
> soo im searching for COS and Pinouts of these radios
>
> Thanks
> Russ
> N3TIH
FWIW-Moxy, Maxar, and Maxar 80 are all nearly identical. The differences
relate to extra filtering on the front end and LO chain, and some in the
tx (oh, and cost). There were two basic power ranges, and each had a
different power connector. The low power radios had a rectangular molex,
with all pins the same size. The high power, and I think all M-80's, had
a larger plug, with two large pins at the top, and the rest the same
size as the low power.
The Maxar 50 was a completely different radio, smaller than the rest,
and shared nothing with the others, except maybe xtals.
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
