Hi Russ Did you receive the Maxar 80 info I sent you? Randy
> From: "Jim B." <[EMAIL PROTECTED]> > Reply-To: [email protected] > Date: Wed, 14 Apr 2004 13:49:01 -0400 > To: [email protected] > Subject: Re: [Repeater-Builder] maxar 80 5 watt > > Admin wrote: > >> i need a pinout of the rear connector as i have 2 of these going for >> repeter usage , and also Randy had mentioned he has a COS circuit >> schematic for these. >> >> ive tried the batlabs web site , very informative for maxar 50's and moxy >> radios , but nothing on the maxar 80 .. >> soo im searching for COS and Pinouts of these radios >> >> Thanks >> Russ >> N3TIH > > FWIW-Moxy, Maxar, and Maxar 80 are all nearly identical. The differences > relate to extra filtering on the front end and LO chain, and some in the > tx (oh, and cost). There were two basic power ranges, and each had a > different power connector. The low power radios had a rectangular molex, > with all pins the same size. The high power, and I think all M-80's, had > a larger plug, with two large pins at the top, and the rest the same > size as the low power. > The Maxar 50 was a completely different radio, smaller than the rest, > and shared nothing with the others, except maybe xtals. > -- > Jim Barbour > WD8CHL > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
