> Daron, I guess I didn't know exactly what you wanted to do. Are you
trying
> to stack the radios?
What I'm trying to do is refill my tool box and parts box in the shop
with some of these brackets. I use them to mount speakers (if I don't
have the bracket), TNC's to the top of radios, radios to panels in
weatherproof exterior boxes, mount custom project boxes to stuff, etc.
They are simply pieces of stamped out sheet metal, about 1/2" on one
side and 1" on the other, with slots punched in them so you could mount
about anything under a dashboard. The set came with several of the size
above, then some that were for real tall radios and could mount under
the dash and reach down 3" or so to the center of the radio for the
mounting screws. They were great, thin enough that one could easily
trim them down with snips, but solid enough that they would pretty much
hold the unit in place.
Thanks, I'll keep looking, we're getting closer.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
