hi guys
i am wondering if there is a way to setup or to program a t2010 to transmit
a tail without the ctcss tail on the end of a transmission (ie to be used as
the transmitter in a a repeater so while the receiver receives a signal it
activates the t2010 transmitter with a ctcss ,and when the receive signal
ceases the transmitter continues with a 1-2 second tail without the
ctcss ).At the moment i have 2 t2010 connected direct through so while a
signal is received the transmitter transmitts with the ctcss
Thank you
Ian Wells
Kerinvale Comaudio
mail service 1017,
Biloela,4715.
www.kerinvalecomaudio.com.au
1-email- [EMAIL PROTECTED]
2-email- [EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
