Did you try contacting CSI?
Neil
John wrote:
>
> I am looking for a programming manual for this tone panel. The front
> panel controls resemble the CSI-32(led's, number pad, power switch
> and reset switch. It has a 15 pin serial connector on the back, some
> adjustments for audio, tone, ect. It has NO phone jack and a power
> connector that has main power, ground and aux. power, ground.) But,
> the PCB is different. There are no model numbers or other
> identification. This was made by Communication Systems Inc. circa
> 1987. Any help would be greatly appreciated.
> Thank you
>
> John
> KE7AYV
> Sheridan, WY
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
