John and Neil, Pretty sure the CSI that he is talking about is out of business and has nothing to do with the one with the web site now. I have several of these but none in service right now and one book, I will look for the book and see if I can find the info needed.
Paul WB5IDM -----Original Message----- From: Neil McKie [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 08, 2004 10:18 AM To: [email protected] Subject: Re: [Repeater-Builder] Re: Midland Community Tone Panel Could it be Connect Systems Inc.? http://www.connectsystems.com Could it be Communications Specialists Inc.? http://www.com-spec.com Hope this helps, Neil John wrote: > > Neil, > Yes, I did. No response. Communications Systems Inc. that I found > on the net is a different company now. I was hoping that someone > here might have had some experience with this tone panel. We tried > the programming instructions for the CSI-32 and they didn't work. > Same style,but, different pc board layout. > Thanks, I guess I'll just keep looking. > > 73's > John > > --- In [email protected], Neil McKie <[EMAIL PROTECTED]> > wrote: > > > > Did you try contacting CSI? > > > > Neil > > > > John wrote: > > > > > > I am looking for a programming manual for this tone panel. The > front > > > panel controls resemble the CSI-32(led's, number pad, power switch > > > and reset switch. It has a 15 pin serial connector on the back, > some > > > adjustments for audio, tone, ect. It has NO phone jack and a power > > > connector that has main power, ground and aux. power, ground.) > But, > > > the PCB is different. There are no model numbers or other > > > identification. This was made by Communication Systems Inc. circa > > > 1987. Any help would be greatly appreciated. > > > Thank you > > > > > > John > > > KE7AYV > > > Sheridan, WY > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
