Could it be Connect Systems Inc.?
http://www.connectsystems.com
Could it be Communications Specialists Inc.?
http://www.com-spec.com
Hope this helps,
Neil
John wrote:
>
> Neil,
> Yes, I did. No response. Communications Systems Inc. that I found
> on the net is a different company now. I was hoping that someone
> here might have had some experience with this tone panel. We tried
> the programming instructions for the CSI-32 and they didn't work.
> Same style,but, different pc board layout.
> Thanks, I guess I'll just keep looking.
>
> 73's
> John
>
> --- In [email protected], Neil McKie <[EMAIL PROTECTED]>
> wrote:
> >
> > Did you try contacting CSI?
> >
> > Neil
> >
> > John wrote:
> > >
> > > I am looking for a programming manual for this tone panel. The
> front
> > > panel controls resemble the CSI-32(led's, number pad, power switch
> > > and reset switch. It has a 15 pin serial connector on the back,
> some
> > > adjustments for audio, tone, ect. It has NO phone jack and a power
> > > connector that has main power, ground and aux. power, ground.)
> But,
> > > the PCB is different. There are no model numbers or other
> > > identification. This was made by Communication Systems Inc. circa
> > > 1987. Any help would be greatly appreciated.
> > > Thank you
> > >
> > > John
> > > KE7AYV
> > > Sheridan, WY
> > >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
