Thanks Paul;
I was mentioning this recent company and got the ad
off a current mag, I think I recalled CSI but its that Senior thing.
Cheers
MH
----- Original Message -----
From: "Paul Finch" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, September 09, 2004 9:41 AM
Subject: RE: [Repeater-Builder] Re: Midland Community Tone Panel
> Mark,
>
> Comm Spec is not the same company as CSI, like I said I have several
panels
> here and I was looking for a manual. It was a fluke that I finally got a
> manual when I was given a pile of junk, included was a CSI-32 manual.
When
> I checked with Comm Spec the person I talked to had no idea what I was
> talking about.
>
> Paul
>
>
> -----Original Message-----
> From: Mark Holman [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, September 08, 2004 8:07 PM
> To: [email protected]
> Subject: Re: [Repeater-Builder] Re: Midland Community Tone Panel
>
>
> Comm Spec is still around, my recent copy of Mission Critical Mag has
their
> Back page ad they run monthly they did recently acquire Selectone is the
> only activity, unless their old Area Code was swapped , I just had a Area
> Code Change in Michigan 3rd. time in 20 years and Detroit gets them more
> often !
>
> their numbers are 714-998-3021 Fax 714-974-3420 & Toll Free Entire US
> 800-854-0547 Fax 800-850-0547
>
> their latest Tone Panel Shows a TP-3200 web is http://www.com-spec.com
>
> August 2004 Info. hope this clairifys things .
>
> stay dry !
>
> MH
> ----- Original Message -----
> From: "Paul Finch" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Wednesday, September 08, 2004 11:22 AM
> Subject: RE: [Repeater-Builder] Re: Midland Community Tone Panel
>
>
> > John and Neil,
> >
> > Pretty sure the CSI that he is talking about is out of business and has
> > nothing to do with the one with the web site now. I have several of
these
> > but none in service right now and one book, I will look for the book and
> see
> > if I can find the info needed.
> >
> > Paul
> > WB5IDM
> >
> >
> > -----Original Message-----
> > From: Neil McKie [mailto:[EMAIL PROTECTED]
> > Sent: Wednesday, September 08, 2004 10:18 AM
> > To: [email protected]
> > Subject: Re: [Repeater-Builder] Re: Midland Community Tone Panel
> >
> >
> >
> > Could it be Connect Systems Inc.?
> >
> > http://www.connectsystems.com
> >
> >
> > Could it be Communications Specialists Inc.?
> >
> > http://www.com-spec.com
> >
> >
> > Hope this helps,
> >
> > Neil
> >
> >
> > John wrote:
> > >
> > > Neil,
> > > Yes, I did. No response. Communications Systems Inc. that I found
> > > on the net is a different company now. I was hoping that someone
> > > here might have had some experience with this tone panel. We tried
> > > the programming instructions for the CSI-32 and they didn't work.
> > > Same style,but, different pc board layout.
> > > Thanks, I guess I'll just keep looking.
> > >
> > > 73's
> > > John
> > >
> > > --- In [email protected], Neil McKie <[EMAIL PROTECTED]>
> > > wrote:
> > > >
> > > > Did you try contacting CSI?
> > > >
> > > > Neil
> > > >
> > > > John wrote:
> > > > >
> > > > > I am looking for a programming manual for this tone panel. The
> > > front
> > > > > panel controls resemble the CSI-32(led's, number pad, power switch
> > > > > and reset switch. It has a 15 pin serial connector on the back,
> > > some
> > > > > adjustments for audio, tone, ect. It has NO phone jack and a power
> > > > > connector that has main power, ground and aux. power, ground.)
> > > But,
> > > > > the PCB is different. There are no model numbers or other
> > > > > identification. This was made by Communication Systems Inc. circa
> > > > > 1987. Any help would be greatly appreciated.
> > > > > Thank you
> > > > >
> > > > > John
> > > > > KE7AYV
> > > > > Sheridan, WY
> > > > >
> > >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
