It doesnt require any mods to the voter. Use the radio links as conventional except for inserting idle tone from the link receiver when no signal is present,its easier than trying to keep link transmitters on 24/7,IMHO.... You can build a tone generator from a 555,lots of circuits around. And dont forget to add an identifier for each link transmitter. Lots of work to set up but worth it when you get it all working properly. ----- Original Message ----- From: Jamey Wright <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, September 14, 2004 8:54 PM Subject: RE: [Repeater-Builder] Voters
> > That way I don't have to do any major mods to the voter. I prefer to run it > the way it was intended. > > > Jamey Wright > > -----Original Message----- > From: John Sichert [mailto:[EMAIL PROTECTED] > Sent: Tuesday, September 14, 2004 7:25 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Voters > > > Jamey, > > If you did read through that thread, why would you still be using status > tone to indicate a COR signal? > > John Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
