With all the talk of voters I thought I might as well throw in my voter question. I was wondering if anyone knows if the motorola Digi-Tac comparitor also has a cor input line as it was said that the Spectra-Tac did. I have a Digi-Tac here with a bad power supply board I would like to put into use. It was used with the dedicated phone lines and is set up for 2175 status tone right now. I would like to do rf links and use cor to show activity, but didn't know if it was possible. If it is then it might be worth my fixing the power supply in this unit.
T.J.
James <[EMAIL PROTECTED]> wrote:
If it is a Motorola spectra tac unit, it SHOULD be run with the status
tone. The status tone sets the AGC so that all the receivers are at the
same level coming in.
Jamey Wright wrote:
>That way I don't have to do any major mods to the voter. I prefer to run it
>the way it was intended.
>
>
>Jamey Wright
>
>-----Original Message-----
>From: John Sichert [mailto:[EMAIL PROTECTED]
>Sent: Tuesday, September 14, 2004 7:25 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: Re: [Repeater-Builder] Voters
>
>
>Jamey,
>
>If you did read through that thread, why would you still be using status
>tone to indicate a COR signal?
>
>John
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
