> > I had something brought to my attention yesterday on my 2 meter
> > repeater. ABout 15 miles away, I'm being told that my repeater can
> > be heard on the output for about 20 to 25 Khz away. From what I am
> > told, it is not legitable, but it's there. The transmitter is a
> > Majorrie Hi-Pro running about 2.5 watts and the PA is a Vocom 200
> > Watts. I'm getting right about 165 watts out of the duplexer, fed
> > through 7/8" hardline 160' to the top of the tower into a Diamond
> > Dual Band Antenna with a vsr of 1.1 with 1/10 of watt reflected. Is
> > this normal, or is there a problem.
Hmm, must be that big amplifier....send it to me and I'll see what I can
do for you *grins*
Before worrying too much about your equipment, I have to ask what the
test method is. Being heard on what? Not legible but being there, that
is a tough one to quantify.
If you don't have access to more test equipment, you can probably try
tuning around on the radio and see if you are being heard from center
channel out every 5hz to 20 or 25khz either or both sides, or if you
just pop up 25khz away. I've seen poor cavities and/or turning make the
same thing happen on a specific frequency 20khz away over 15 miles and
it was readable. Unfortunately it was on the output of another
repeater. One little tweak on the cans and we could make the spur move
up and down. First step was to move it where it wasn't a conflict with
any local repeater, Second step was a return trip with new cans. The
cans in place were surplus BpBr of an unknown manufacturer, so we
couldn't get design specs on them.
Of course a spectrum analyzer would be handy, but first I'd see if I was
all over the place by listening 5khz at a time or if it is just a spur
at one location.
Good Luck!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/