Well it seems that I am told I have to change frequencies, has it 
that one of my users interferred with the same troublesome repeater 
I've had all along, and now the coordinator says I have to move.

Not sure how well all the equipment will handle the change. Here is 
what I have as equipment, and will it all make it there.  We are 
moving from 146.925- to 145.410-, and the expense is the last thing 
I needed right now.

GE MASTR PRO ER41 Receiver
Vocom Amp, tuned for 146.925
and then to top if off, I just got the phasing harness for the DB224 
and it was cut right for 146.925.
My main transmitter is the (no arguements please), Maggorie HiPro 
transmitter exiting 2 watts to the vocom amp.
TX RX Duplexers.  

How low in frequency will the MASTR Pro go before I loose quality 
sensitivity, right now, it's about .15 uv with a preamp, and 
receives excellent.  The vocom amp is model #VVC200-2ref and was 
designed for the 146 Mhz range.

I'm sure the duplexers should not be a problem, other than getting 
them re-tuned.  Thoughts!

What anger's me the most about this, is that the repeater owner went 
straight to the coordinator, did not bother to talk with me.  I 
changed the PL of the repeater.

Other sad part is, the user that was getting into their system was 
not getting into the main receiver, but rather a remote site.  I 
wonder how tight his receiver really is, and is it a synthesized 
radio, or something of quality.

Mathew








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to