Sorry all .... Should have said it was a mobile...I forgot GE was dumb enough to give the same designation to different types of radios.
Also the 4 slugs are not only stripped but if like the others on the board that I did get loose these will be stuck .... tight. Pointers before I replace them gladly accepted. I would consider buying a whole radio depending on the price or just another exciter board or if someone has a spare.... GE Custom MVP UHF Mobile - board needs to be capable of moving to 444 mhz area of the ham band (no tripler please). As I say I'm going to duplex it and I've told to avoid the tripler versions. Thanks Larry ----- Original Message ----- From: "Q" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, March 16, 2005 9:59 AM Subject: Re: [Repeater-Builder] GE MVP tuning slugs > > MVP handheld or is it a Custom MVP mobile? I have had some luck with > carefully drilling out the old slugs and replacing them on Custom MVP's. > It may be less work to just get another exciter board and change it out. > They are certainly cheap enough. > > Paul Finch wrote: > >> Larry, >> >> If I remember correctly that hand held radio has modules, have you >> taken the exciter out and tried to turn the slugs out from the other >> side? Normally only one end of the slug is stripped. Remember, it's >> been 20 years since I worked on one of those radios. >> >> -----Original Message----- >> *From:* Larry Lockard [mailto:[EMAIL PROTECTED] >> *Sent:* Wednesday, March 16, 2005 11:17 AM >> *To:* [email protected] >> *Subject:* [Repeater-Builder] GE MVP tuning slugs >> >> I have a GE MVP (UHF) that I am in the process of moving to the >> ham bands and duplexing. >> >> I am in need of about half a dozen slugs anyone have some spares >> they would care to sell? Contact me off list please....... larry >> at thunderbolt.net >> >> I found that I have 4 stuck slugs in the exciter board. It appears >> that someone before me has pretty well reamed the centers so there >> is hardly any shoulders to grip the tuning wand. Anyone have >> an easy way to free stuck slugs without removing the cans or >> damaging the coils? >> >> Larry >> > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/

