Are you sure it was LDF1 and not FSJ1? LDF1 is VERY rare (I've never
seen it), but FSJ1 is pretty common. LDFx is regular hardline, FSJx is
Superflex.
--
Jim Barbour
WD8CHL
mch wrote:
> Sounds like it must have been larger than 1/4".
>
> Joe M.
>
> DCFluX wrote:
>
>>I've am using the LDF1-50 on my 64 machine. I dont know what the deal
>>is but the reducers I was going to run both for both RG-59 and RG-8X
>>wouldn't fit this stuff. So I had to just solder the connector
>>straight to the cable The center conductor of the cable just fits
>>inside the PL-259's. I don't know if RF parts sent me 3/8" by mistake
>>or what. But it works about the same as the RG-213 that it replaced.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
