Warren
I happen to have a cophasing harness for 4 - 1/4 wave length dipoles , I
also have antennas somewhere ,Was used for 154 mh but could be tuned for 144
to
148 mh These have "N" connectors, If you build one you have to use 75 olm
,RG 6 or RG11 , to make a match, If you are co phasing beams I have a "26 -
B2"
They used 2-120" runs of RG 59 into a coax Tee, remember the distance
between antenna's is important. You might try an older Antenna Hand book.
"Oldmax"
Dale N8SAC
----- Original Message -----
From: "Warren Beaul�" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, April 28, 2005 2:10 PM
Subject: [Repeater-Builder] antenna's
> Someone has told me their is a co-phasing harness
> available for two meters has anyone heard of this. to
> unite two antennas. In the same way truckers do on
> CB's
> Thanks
>
> ______________________________________________________________________
> Post your free ad now! http://personals.yahoo.ca
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
