Sounds like a regular Bud diecast aluminum enclosure would fit the bill.
Try here: http://www.budind.com/view.php?part=n4
Hammond and others make comparable boxes. Available from Mouser, Digikey,
Newark, et al.
--- Jeff
> -----Original Message-----
> From: [email protected]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jim, K8COP
> Sent: Thursday, December 01, 2005 9:51 AM
> To: [email protected]
> Subject: [Repeater-Builder] Source for RF enclos
>
>
> I have a Hamtronics LNP VHF Preselector board. I would like
> to install it
> in a RF tight box. Checked with Hamtronics and they have no
> such item and
> no advise as to where to find one. I want to install the
> board in a metal
> box and have the antenna leads come out to two female N
> connectors, and a 12
> vdc through a feed-thru connector for power. Their is no
> room to install it
> within the receiver.
>
> Thanks,
>
> Jim, K8COP
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
