20-30 yards!?!?!? How about simple wireline you string yourself?
------ Original Message ------
Received: Sun, 19 Mar 2006 06:45:12 PM CST
From: "k4ij" <[EMAIL PROTECTED]>
To: [email protected]
Subject: [Repeater-Builder] Linking Suggestions Please
> Hi,
> Here's the deal. I have two sites...Site one is where my 440 hub
> repeater is located. Site two is where I'm planning to put a 220
> repeater. The distance between the two is about 20-30 yds.
> I need to find a way to link the two together. Doing it on 440 is out
> for several reasons. I could use 900 with a couple of GTX900s or
> similiar but that seems to be a total waste not to mention would cost
> $250-$300. Seems like there should be an alternative to spending that
> kind of money. I also need this to work without attracting a lot of
> attention, ie...putting up antennas outside. The radios would need to
> be able to do CTCSS or DCS.
>
> Someone suggested using telemetry radios. Anyone have any experience
> with those? Someone else said I might be able to do it with hts on low
> power. I have been thinking about 1.2 GHz but can't locate anything
> that would work.
>
> Your suggestions?
>
> Thanks
> Mike K4IJ
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
