I have a GE Master 2 base repeater. I bought a NHRC 3+ it works but is hard to program. I need help because I also got the TS64DS encoder decoder and I cant get it to work. Called the Comm Spec people and they were not alot of help. The NHRC 3+ has a 6 pin plug on it. I would love to have the wiring order for the colors on the encoder to the 6 pin plug on the controller. Any other help would be greatly appreciated. Im in after 6PM you can call at 318-641-1718.
Thanks >From: Ron Wright <[EMAIL PROTECTED]> >Reply-To: [email protected] >To: [email protected] >Subject: Re: [Repeater-Builder] GE MASTR II and RC-1000V >Date: Tue, 10 Jul 2007 17:09:38 -0500 (CDT) > >Vern, > >One question. What do you mean "hard time kicking into transmit mode"??? > >Are you refering to having to give strong signal into the repeater or long >key into the repeater to bring up??? > >The RC-1000V has a anti-kerchunk filter that requires a time delay before >it keys the repeater. This can be turned on and off. > >Might be more specific on the problem. > >73, ron, n9ee/r > > > > > > > >From: mung_bungholio <[EMAIL PROTECTED]> > >Date: 2007/07/10 Tue AM 10:21:31 CDT > >To: [email protected] > >Subject: [Repeater-Builder] GE MASTR II and RC-1000V > > > > >I purchased a GE MASTR II with an RC-1000V controller and I am having a > >problem with it. > > > >When I power it on it transmits the ID and seems to be functioning like > >it should. However once on it has a hard time kicking into transmit > >mode. I think that it may be that the radio is not breaking squelch. > >I have no idea how this was setup and modified so it may just be that > >the squelch circuit is not right or not adjusted right, however I have > >not seen any squelch adjustment at all on the outside of the radio. > >Before I start to tear this thing apart and break anything that isn't > >already broken. Is there any way I can determine if the radio is > >breaking squelch or what is going on with receive? > > > >All I have is the control cable with the end cut off which is patched > >into a terminal strip that is then connected to the RC-1000V cable that > >goes to the DB25 on the back of the case. Does anyone have the wiring > >colors of the MASTR II control cable and/or the RC-1000V factory cable > >if there is such a thing? That might help in trouble shooting. > > > >Thanks, > >Vern > >KI4ONW > > > > > > >Ron Wright, N9EE >727-376-6575 >MICRO COMPUTER CONCEPTS >Owner 146.64 repeater Tampa Bay, FL >No tone, all are welcome. > > > > > > > >Yahoo! Groups Links > > > _________________________________________________________________ Local listings, incredible imagery, and driving directions - all in one place! http://maps.live.com/?wip=69&FORM=MGAC01
