There is a glitch in the software that will cause the controller to lock-up under/in certain conditions. The reset timer board reboots the hardware every so often so the controller will reset every x-amount of time, which I believe to be about every half hour.
If you don't have the board in your tp-3200 you should consider putting one inside if you use mulitple ctcss codes... cheers, skipp > "n9wys" <[EMAIL PROTECTED]> wrote: > > Skipp - before I tear into mine, does this need to be added, removed or > replaced? Or something else? > > For some reason, mine also ID's twice when it first "wakes up" after having > been inactive for some time. Is this a programming issue - maybe I have > something entered twice? I know it has User ID and System ID, and I have > tried turning each off independently -- to no avail. > > Thanks! > Mark - N9WYS > > -----Original Message----- > From: [email protected] On Behalf Of skipp025 > > Anyone with a tp-3200 needs to inspect it for the additional > reset timer daughterboard. It's a 3-wire reset timer added to > the tp-3200 to prevent it from locking-up in some conditions. > > Open your tone panel and look for the small daughterboard anchored > down with double sided tape or Silicon glue. > > Last I heard it was a free kit but might currently be modestly > priced. Might save you a trip to the site. > > cheers, > s. > > > I own two of their products (a TP-3200 repeater panel > > and a TS-64DS tone board) and have been very happy with > > both. > > Mark - N9WYS >
