If it IDs at the same time, is that OK? What about repeaters that send a beacon out every 30 minutes?
These are all being generated by the controller at the repeater site, and if these transmissions have been authorized by the trustee and/or control ops, it seems to be an allowed transmission, annoying (to some) as it may be. Bob M. ====== --- "Tony L." <[EMAIL PROTECTED]> wrote: > If you've programmed the repeater to make time > announcements even > when there in no activity on the receiver, you are > in violation of > FCC rules that prohibit "broadcasting." > > --- In [email protected], "kd7ikz" > <[EMAIL PROTECTED]> wrote: > > > > Hi All > > I am runnig a MSF 5000 CLB with a Arcom controll. > I am also runnig > > echolink on the repeater. I have the repeater say > the time every > hour > > and half hour. I was going to work today and the > repeater said to > time > > ok. Then I was going to get on echolink and the > repeater did not > key > > up so I called home and the wife said that the TX > light was on and > the > > RX light was blinking on and off. She tryed to > reset but the RX > light > > would not come back on. So I just let it be for > about two hours and > > tryed it again and the RX light came up. can > anyone gave me any > ides > > on what it mite be? Also I have to keep a fan on > the RF tray and > > station control because it gets to hot and when it > TX it sounds > like > > it has a open squelch.I am new to the repeater > world. The repeater > is > > working fine other then that. > > Thanks > > Bob > > kd7ikz > > echolink 216767 ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs
