Hi The model # C74CLB-7106AT. It did it again. The RX light is blinking. When it said the time and ID heard 3 bees when it first keyed up. I had to put the fan back on it last night because I was getting that open squelch nose. Could the RF tray be getting to cold? Bob
----- Original Message ----- From: Bob M. To: [email protected] Sent: Saturday, December 08, 2007 3:01 AM Subject: Re: [Repeater-Builder] MSF 5000 CLB Start by providing the entire model number of the station, so we can give you some reasonable answers that will address your questions and problems. Bob M. ====== --- kd7ikz <[EMAIL PROTECTED]> wrote: > Hi All > I am runnig a MSF 5000 CLB with a Arcom controll. I > am also runnig > echolink on the repeater. I have the repeater say > the time every hour > and half hour. I was going to work today and the > repeater said to time > ok. Then I was going to get on echolink and the > repeater did not key > up so I called home and the wife said that the TX > light was on and the > RX light was blinking on and off. She tryed to reset > but the RX light > would not come back on. So I just let it be for > about two hours and > tryed it again and the RX light came up. can anyone > gave me any ides > on what it mite be? Also I have to keep a fan on the > RF tray and > station control because it gets to hot and when it > TX it sounds like > it has a open squelch.I am new to the repeater > world. The repeater is > working fine other then that. > Thanks > Bob > kd7ikz > echolink 216767 __________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs
