Hi Jed, Not being clear on exactly what you want to do... you can set the repeater up as normal with zero tail/hang time. You could then externally extend the hang/tail time cos.
If you're trying to remove the encoding during no COS tail/hang time then you would probably need to not run any internal repeater tail/hang time. Another possible option would be to externally source repeater ptt using the main (set for csq tx and a different rx dcs code) and external tone table set to encode and decode the desired normal tones. The external repeater/duplex base ptt ctcss/dcs should follow the first (main) encode table value. If that value is set to carrier squelch... then you have not tone going out the door. Just thinking out loud... cheers, skipp skipp025 at yahoo.com www.radiowrench.com > "Jed Barton" <j...@...> wrote: > > Hey guys, > > Any way on the tkr850 to make the PL encode only on COS? > I know it has a PL function built in, but wanted to know if this is doable > in the programming. > > Thanks, > Jed >
