>-----Original Message----- >From: Repeater-Builder@yahoogroups.com [mailto:Repeater- >buil...@yahoogroups.com] On Behalf Of Thomas Oliver >Sent: Saturday, November 07, 2009 7:45 PM >To: Repeater-Builder@yahoogroups.com >Subject: Re: [Repeater-Builder] LDG Voter RVS-8 Mystery > >I would first try bypassing the voter and hook the link receiver >directly to the 850 to make sure levels are good. There should be no >reason you have low audio out of the controller the 850 normally has >gobs of audio and has to be knocked down with a resistor of >considerable >ohmage in order not to overdrive a transmitter. > >As someone else stated the oscilloscope is your friend here. Note the >levels on the input and output of the controller with the scope when >it >is working properly then put the voter back in and compare. > >tom > > Tom, Thanks for the suggestion. Both you and Skip have zeroed in on input levels as a possible problem. I will check this out. John
> > > >------------------------------------ > > > >Yahoo! Groups Links > > > > >__________ NOD32 4582 (20091107) Information __________ > >This message was checked by NOD32 antivirus system. >http://www.eset.com
