Thanks Mike. Bookmarked.
Dan On Feb 15, 2010, at 12:53 AM, <[email protected]> <[email protected]> wrote: > > > Sounds good well look for you on the air. By that time you may want > to look at the web site to see if there are any more on line. www.rmham.org > > > > Mike Mullarkey K7PFJ > 6886 Sage Ave > Firestone, Co 80504 > 303-736-9693 > > > From: [email protected] > [mailto:[email protected] > ] On Behalf Of Dan Blasberg > Sent: Sunday, February 14, 2010 10:26 PM > To: [email protected] > Subject: Re: [Repeater-Builder] HAM Mototrbo Systems > > > Mike, > > Thanks for the info, next time I am through your neck of the woods on > my way to visit family, i will load up your machine in the HT. > > Dan > KA8YPY > > On Feb 15, 2010, at 12:00 AM, <[email protected]> <[email protected]> > wrote: > > > > > > > Hi Dan, > > > > Agree with the TDMA upgrade but were not supposed to talk about that > > now, ha ha. > > > > I think most of us who are installing the trbo systems are using > > color code 1 and some could be using other codes. I think it would > > be neat if there were a web site that compiled all the systems > > owners could login and add their information to their prospective > > users. > > > > I am going to keep our system on color code 1 using IPSC IP Site > > Connect. Slot 1 is for local traffic and slot 2 is for IPSC IP Site > > Connect. > > > > > > Mike Mullarkey K7PFJ > > 6886 Sage Ave > > Firestone, Co 80504 > > 303-736-9693 > > > > > > From: [email protected] > > [mailto:[email protected] > > ] On Behalf Of Dan Blasberg > > Sent: Sunday, February 14, 2010 9:14 PM > > To: [email protected] > > Subject: Re: [Repeater-Builder] HAM Mototrbo Systems > > > > > > The Phase 2 P25 standard is far from complete. > > > > And yes, there are several TDMA "TYPE 2" systems up and working, but > > none are certified "PHASE 2" P25 systems. > > > > I know in our county, the contract written with Motorola includes a > > statement about upgrading the system to an approved/certified > Phase 2 > > system when the standard is complete, at no cost to the county. This > > not only includes infrustructure, but all of the radios as well. > > > > Now, back to the topic at had...MOTOTRBO Amateur Systems....Is > > everyone leaving the system setting in there respective defaults, or > > is there some recommendation for settings? > > > > Dan > > KA8YPY > > > > On Feb 14, 2010, at 9:40 PM, MCH wrote: > > > > > I think the Phase II standard is pretty much a done deal, it > will be > > > TDMA, and there are already Phase II systems on the air. > > > > > > Joe M. > > > > > > Dan Blasberg wrote: > > >> P25 phase 2 is indeed supposed to be TDMA, the question is will > > it be > > >> Motorola's implementation or another? Just because Motorola comes > > >> out > > >> with a system first does not always mean it will be accepted as > the > > >> defacto standard, as was not the case with Motorola VSLEP for > their > > >> 1st digital implementation. > > >> > > >> Dan > > >> KA8YPY > > >> > > >> > > >> > > >> On Feb 14, 2010, at 5:14 PM, <[email protected]> wrote: > > >> > > >>> > > >>> I am aware of the repeaters in Cal and that is awesome. The new > > APX > > >>> series radio is TDMA compliant and if past history continues to > > >>> prevail the TDMA phase 2 P25 will be TDMA. > > >>> > > >>> > > >>> Mike Mullarkey K7PFJ > > >>> > > >>> > > >>> > > >>> From: [email protected] > > >>> [mailto:[email protected] > > >>> ] On Behalf Of Gary > > >>> Sent: Sunday, February 14, 2010 1:38 PM > > >>> To: [email protected] > > >>> Subject: RE: [Repeater-Builder] HAM Mototrbo Systems > > >>> > > >>> > > >>> Here in Southern CA. (LA, Orange, and San Diego counties) we > > have at > > >>> least 4 > > >>> Mototrbo repeaters running AND IPSC linked on the amateur band. > > >>> There are > > >>> more than two dozen users known to have invested in Trbo radios > > with > > >>> interest growing steadily. Given the behind-the-scenes Mototrbo > > >>> activity > > >>> that has been taking place over the past two years in amateur > > radio > > >>> it's > > >>> become increasingly clear that the system works well and that > > >>> Motorola is > > >>> continuing to improve or release features and tools all the > time. > > >>> They > > >>> really hope APCO adopts their TDMA format as the next generation > > of > > >>> P25 but > > >>> that is yet to be seen meanwhile Motorola is clearly focused on > > >>> developing > > >>> the Mototrbo platform. > > >>> Gary > > >>> > > >>> -----Original Message----- > > >>> From: [email protected] > > >>> [mailto:[email protected]] On Behalf Of Dan > > Blasberg > > >>> Sent: Sunday, February 14, 2010 10:12 AM > > >>> To: [email protected] > > >>> Subject: Re: [Repeater-Builder] HAM Mototrbo Systems > > >>> > > >>> Mike, > > >>> > > >>> In the DC area there is currently one UHF machine and about 5-10 > > >>> amateurs playing with MOTOTRBO. > > >>> > > >>> I would be interested to know what other areas are using for > > setting > > >>> or are they leaving everything in the default setting? > > >>> > > >>> Dan > > >>> KA8YPY > > >>> > > >>> > > >>> > > >>> > > >> > > >> > > >> > > >> ------------------------------------ > > >> > > >> > > >> > > >> Yahoo! Groups Links > > >> > > >> > > >> > > >> > > > > > > > > > ------------------------------------ > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > >
