Hi Kev would it be feasable to use a sig gen cranked right up ? Steve ----- Original Message ----- From: "Kevin Custer" <[email protected]> To: <[email protected]> Sent: Friday, July 30, 2010 5:52 PM Subject: Re: [Repeater-Builder] Repeater transmit levels at the receiver?
> Tim wrote: >> >> Using the Micor's exciter - about 270mW. Cannot see any spurs/noise >> within 80dB of the main carrier. > > I wonder.... Most of the MICOR exciters I have converted to 6M > result in more than 270 mW of power - in fact, 400 to 600 mW is > common. I wonder if something is amiss at the exciter, like a bad > crystal or stage not peaked correctly generating noise. > > If you have a 6M hand-held or mobile rig capable of transmitting on your > repeater output frequency, try substituting it for the MICOR and see > what happens to your receiver with one of these transmitting instead. > > Kevin > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >
