> The amp does fine without the duplexer inline. Full power and > it follows the Mirage chart. But I had a thought (that's > SCARY) I pulled out my seldom used MFJ 259 and dialed in my > output. I plugged it into the duplexer TX side and noted that > it reads 39 ohms. I disconnected the remaining two cans and > attached a dummy load to the output of the can and still read 39 ohms. > > I'm not sure what conclusion to take from this. I mean, low tech!
What does the dummy load alone read? How about my other question - do you have "grunge" with the repeater transmitter NOT keyed (i.e. just listening on the local repeater receiver with the repeater transmitter disabled)? > Thank you for your best wishes re: my daughter. She has had a > tremendously bad week. The high dose chemo has burned her > body and worse that I won't share. But she's a sick little 8 > year old. http://princessrachael.com Tried to go to the URL but it took me to some other web site and asked me to log in? Again, best wishes. I have a 1 year old and a 3 year old, they're my best buddies, I can't imagine what you're going through. --- Jeff WN3A
