throw away the duplexer and get another i seem to read everything you state it is fine until i plug in the duplexor inline
at least if not, do you have another duplexer to try in its place Marcus On Sat, Aug 14, 2010 at 1:29 PM, Jeff DePolo <[email protected]> wrote: > > > > The amp does fine without the duplexer inline. Full power and > > it follows the Mirage chart. But I had a thought (that's > > SCARY) I pulled out my seldom used MFJ 259 and dialed in my > > output. I plugged it into the duplexer TX side and noted that > > it reads 39 ohms. I disconnected the remaining two cans and > > attached a dummy load to the output of the can and still read 39 ohms. > > > > I'm not sure what conclusion to take from this. I mean, low tech! > > What does the dummy load alone read? > > How about my other question - do you have "grunge" with the repeater > transmitter NOT keyed (i.e. just listening on the local repeater receiver > with the repeater transmitter disabled)? > > > Thank you for your best wishes re: my daughter. She has had a > > tremendously bad week. The high dose chemo has burned her > > body and worse that I won't share. But she's a sick little 8 > > year old. http://princessrachael.com > > Tried to go to the URL but it took me to some other web site and asked me > to > log in? > > Again, best wishes. I have a 1 year old and a 3 year old, they're my best > buddies, I can't imagine what you're going through. > > --- Jeff WN3A > > >
