Have you tried rebooting the switcher (unplug it and plug it back in)
this fixed ours when it wasn't responding to our wide orbit system,
wasted 2-3 hours trying to figure that one out....
Otherwise I have no clue, sorry. Haven't used one with RD yet....
Nathaniel C. Steele
Assistant Chief Engineer/Technical Director
WTRM-FM / TheCrossFM
On 2/28/2013 3:09 PM, Rob Landry wrote:
> To my surprise, I'm having trouble with a Broadcast Tools 8x2 switcher
> that worked perfectly a few days ago. The other day, I
> was able to use SO commands to make it switch, but today it inexplicably
> ignores them.
>
> Today I tried setting it up to use ST commands. The first two worked (sort
> of), but now it's ignoring those too.
>
> The switcher works reliably in Putty when I type in commands such as:
>
> *11{CR}
>
> ...which would eliminate the possibility of a hardware problem, a
> connection problem, or a configuration problem. The serial port parameters
> are 2400/N/8/1.
>
> I wonder what I'm doing wrong.
>
> This is Rivendell 2.1.5 running on Debian 6.
>
>
> Rob
> _______________________________________________
> Rivendell-dev mailing list
> [email protected]
> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
>
>
>
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
