Hi All, Just wondering when 2.5.0 will be available on the tryphon repos?
Cheers, Lee -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Fred Gleason Sent: Tuesday, 2 April 2013 6:23 AM To: User discussion about the Rivendell Radio Automation System Subject: Re: [RDD] Rivendell v2.5.0 On Apr 1, 2013, at 15:26 48, John Handelaar wrote: > Is there somewhere I can find out more about this one? Hardware support, and the like? It uses GPIO to communicate with the console, so if a console has the ability to 'remote control' its channel ON/OFF status by means of contact closures, it should be compatible. Any Rivendell-supported GPIO device (both real and 'virtual' ones like LiveWire or vGuest) can be used. It's configured in the 'Edit GPIOs' dialogs in RDAdmin->ManageHosts->RDAirPlay. The 'GPI' entries are for signals coming from the console to RD, while the 'GPO' ones are for commands sent from RD to the console. Two signaling types are supported. Most setups use 'Edge', which uses momentary closures on different GPIO lines to indicate channel ON and OFF for each channel. There are a few systems out there (e.g. Logitek vGuest setups) that use 'Level', which uses a continuous closure on a single GPIO line for each channel. Cheers! |-------------------------------------------------------------------------| | Frederick F. Gleason, Jr. | Chief Developer | | | Paravel Systems | |-------------------------------------------------------------------------| | Obstacles are what you see when you take your eyes off the road. | | -- Anonymous | |-------------------------------------------------------------------------| _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
