Thank you Fred! As always amazing work. Stan
On 2/04/13 4:22 AM, Fred Gleason wrote: > On Apr 1, 2013, at 15:26 48, John Handelaar wrote: > >> Is there somewhere I can find out more about this one? Hardware support, >> and the like? > It uses GPIO to communicate with the console, so if a console has the ability > to 'remote control' its channel ON/OFF status by means of contact closures, > it should be compatible. Any Rivendell-supported GPIO device (both real and > 'virtual' ones like LiveWire or vGuest) can be used. It's configured in the > 'Edit GPIOs' dialogs in RDAdmin->ManageHosts->RDAirPlay. > > The 'GPI' entries are for signals coming from the console to RD, while the > 'GPO' ones are for commands sent from RD to the console. Two signaling types > are supported. Most setups use 'Edge', which uses momentary closures on > different GPIO lines to indicate channel ON and OFF for each channel. There > are a few systems out there (e.g. Logitek vGuest setups) that use 'Level', > which uses a continuous closure on a single GPIO line for each channel. > > Cheers! > > > |-------------------------------------------------------------------------| > | Frederick F. Gleason, Jr. | Chief Developer | > | | Paravel Systems | > |-------------------------------------------------------------------------| > | Obstacles are what you see when you take your eyes off the road. | > | -- Anonymous | > |-------------------------------------------------------------------------| > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > . > _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
