Dan, I don't know if this could be similar to your issue, but I recently ran into a similar situation on a M-Audio Delta 1010 card (the one with the rack-mount breakout box).
The machine I had issues with is not running Rivendell - in fact it is a Windows box set up to stream audio from 3 radio stations. The inputs / outputs on the 1010 suddenly stopped working and would either produce white noise, hum, or silence. All 3 streams stopped working properly on the same day. In the end it turned out to 2 things - inside the breakout box I found a bad voltage regulator and a bad capacitor. Replacing them both and my m-audio 1010 is working fine. Just something to consider, your difficulty may not be software related. Lorne Tyndale > -------- Original Message -------- > Subject: Re: [RDD] Serious issue when recording in RDCatch > From: dan <[email protected]> > Date: Thu, November 07, 2013 11:17 am > To: <[email protected]>, "Pedro Picoto (TSF/tec)" > <[email protected]> > > > What doesn't make sense is that things have been running fine on the whole up > until a few weeks ago. Nothing has changed hardware wise, > apart from the addition of and extra workstation. I have even re-installed > the OS, tested all the hardware of the workstations, carried > out the recordings on another computer etc. > > It looks like I'm going to have to ditch this software for something better > and more reliable as it's unpredictability seems to be > getting worse in later versions, not better. This is a shame, because on the > whole, Rivendell is very good. Now that we are on FM and > taking revenue from advertising and sponsorship, I cannot afford for another > days output to be completely messed up by this software > that suddenly decides it no longer likes the soundcards after a year... > > Very angry. > > Dan > > www.loudaudio.co.uk > > On Thu 07/11/13 10:45 , "Pedro Picoto \(TSF/tec\)" [email protected] sent: > > I don't have an concrete answer to your problem. All I can say is > > that I've obtained a "full-amplitude white noise" when recording VT's > > where the VT recording had the same input port number as the playback,for > > example: > > > > Playout_0L - Record_0L Playout_0R - Record_0L > > Setting the input or output to another port fixed the problem. I know > > that my suggestion didn't fix Dan's problem. > > _______________________________________________ > > Rivendell-dev mailing list > > [email protected] > > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev [1] > > > > > > > > Links: > > ------ > > [1] > > http://webmail.easyspace.com/parse.php?redirect=http://caspian.paravelsyste > > ms.com/mailman/listinfo/rivendell-dev > > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
