Hello all! Some time ago I repurposed a USB gamepad as a GPI controller on one of my Rivendell machines (running 2.10.2 / RD Appliance). I wired it up, added it in the “Switchers GPIO” area of rdadmin, and verified it worked using rdgpimon. Then I went into the “RDAirplay” section of rdadmin, assigned a couple of the inputs as Start GPIs, and called it a day. All that has been fine, and remains so.
The trouble came today, when I tried to assign some macro carts to one of the GPIs (under “Switchers GPIO” in rdadmin). The on/off state still appeared properly in rdgpimon, and would appear in the logs, but the carts would not fire. I tried rebooting. I tried disabling the GPI settings in the “RDAirplay” section of rdadmin. I tried setting the GPIs manually (GE/GI). No change. Run the carts by any other means - in rdairplay, using the EX RML command, etc - and they work fine. I just can’t seem to get the GPI triggers to work. Any ideas? --------------- Keith Thelen Kanabec Systems _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
