I had a similar problem and it ended up being a couple of corrupt DB table. I had to repair the DB tables then delete and recreate the switchers in RDAdmin.
John On Fri, Mar 20, 2015 at 7:47 AM, Keith Thelen <[email protected]> wrote: > Still fighting with this. Any ideas? > > > A little more clarification. Here’s my ripcd log: > > > > 17/03/2015 - 12:02:06.008 : started > > 17/03/2015 - 12:03:09.274 : received rml: 'GI 0 I 1 1 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.279 : received rml: 'GI 0 I 1 0 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.280 : received rml: 'GI 0 I 2 1 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.280 : received rml: 'GI 0 I 2 0 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.281 : received rml: 'GI 0 I 3 1 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.281 : received rml: 'GI 0 I 3 0 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.282 : received rml: 'GI 0 I 4 1 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.284 : received rml: 'GI 0 I 4 0 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.285 : received rml: 'GI 0 I 5 1 150001!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.286 : received rml: 'GI 0 I 5 0 150002!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.286 : received rml: 'GI 0 I 6 1 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:09.287 : received rml: 'GI 0 I 6 0 0!' from > 10.22.0.114 > > 17/03/2015 - 12:03:12.279 : received rml: 'SZ 0!' from 10.22.0.114 > > 17/03/2015 - 12:03:17.783 : GPI 0:5 ON > > 17/03/2015 - 12:03:19.383 : GPI 0:5 OFF > > > > As you can see, GPI 5 has been set to run cart 150001 when turned on, > and 150002 when turned off. I then close GPI 5 and reopen it. The closure > is detected, but the cart does not fire. Just for fun, I tried manually > sending "GE 0 5 1!” and closing/opening GPI 5 again, but there was no > change. > > > > Meanwhile, GPIs 1 and 3 are connected to the console’s remote start > buttons. Under RDAdmin -> Manage Hosts -> [host name] -> RDAirplay -> [log > output number] -> Edit GPIOs, I have them set as Start GPIs (GPI 1 is Main > Log Output 1’s start GPI; GPI 3 is Main Log Output 2’s start GPI). This > works properly - close GPI 1 or GPI 3 and carts fire in RDAirplay. > > > > I can’t seem to find any reason why this isn’t working. Any thoughts? > > > --------------- > Keith Thelen > Kanabec Systems > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
