Hi Keith
Have you defined the start/stop macro's under the Switchers GPIO section
or RDairplay?
Stan
On 17/03/2015 10:27 am, Keith Thelen wrote:
Hello all!
Some time ago I repurposed a USB gamepad as a GPI controller on one of my
Rivendell machines (running 2.10.2 / RD Appliance). I wired it up, added it in
the “Switchers GPIO” area of rdadmin, and verified it worked using rdgpimon.
Then I went into the “RDAirplay” section of rdadmin, assigned a couple of the
inputs as Start GPIs, and called it a day. All that has been fine, and remains
so.
The trouble came today, when I tried to assign some macro carts to one of the
GPIs (under “Switchers GPIO” in rdadmin). The on/off state still appeared
properly in rdgpimon, and would appear in the logs, but the carts would not
fire.
I tried rebooting. I tried disabling the GPI settings in the “RDAirplay”
section of rdadmin. I tried setting the GPIs manually (GE/GI). No change.
Run the carts by any other means - in rdairplay, using the EX RML command, etc
- and they work fine. I just can’t seem to get the GPI triggers to work. Any
ideas?
---------------
Keith Thelen
Kanabec Systems
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
